EN
Alaabta
Soosaarayaasha aasaaska saxda ah ee caadadii centrifugal kabka birta qayb zinc birta aluminium tuurida qaybo vacuum centrifugal shubista
Product Description
curiye Qalabka
|
C |
Si |
Mn |
Cr |
Ni |
Mo |
shan |
S,P |
Intro |
ZG310-570
|
0.50 |
0.6 |
0.90 |
≤ 0.040
|
Low plasticity and toughness, low temperature resistance, low cost |
||||
35CrMo
|
0.32 -
0.37
|
0.17- 0.37
|
0.40-0.70 |
0.80-1.10 |
0.15- 0.25
|
≤ 0.035
|
High strength, toughness and hardness, high temperature resistance, low cost |
||
0.30- 0.38
|
0.17-0.37 |
0.40-0.70 |
1.00-1.30 |
0.20- 0.30
|
0.10-0.20 |
≤ 0.035
|
Performance better than 35crmo, low cost |
||
0.30-0.37 |
0.6-0.9 |
0.40-0.90 |
0.40-0.90 |
0.06-0.90 |
0.40-0.50 |
≤ 0.035
|
High strength and toughness, high temperature resistance, high cost |
||
KCP-12
|
0.20-0.30 |
≤0.60 |
0.90-1.10 |
0.40-0.90 |
1.00-1.50 |
0.30-0.50 |
≤ 0.040
|
High strength and toughness, high temperature resistance, high cost |
1. Baahinta
Annealing is the heating of the steel spool to the proper temperature and then the slow cooling of the steel casing to or near equilibrium.
2. Normalization
Normalizing is to cool the steel spool after reaching the right temperature, the effect of normalizing is similar to annealing, and it is usually used to improve the cutting properties of the material, and sometimes it is also used for low requirements for certain parts as a final heat treatment.
3. Deminta
Quenching is a rapid cooling process after heating a workpiece in a quenching medium of water, oil or other organic salts and organic water. Steel hardens after quenching, but at the same time becomes brittle.
4. Xaraareyn
Tempering is done to reduce the brittleness of the steel. The quenched steel is kept at 650 °C above room temperature for a long time and cooled again, a process known as tempering.
Semi-Automatic PET Dhalo Mashiinka Mashiinka Dhalada Sameynta Mashiinka Mashiinka Dhalada Mashiinka PET Mashiinka Sameynta Dhalada PET waxay ku habboon tahay soo saaridda weelasha caagga ah ee PET iyo dhalooyinka qaab kasta leh.
Adeegyada aan bixino
